Overview:

V-Belt pulleys are a type of mechanical device used to transfer power between shafts, primarily in industrial applications. It has minimum slippage due to maximum wedge contact.
A higher power rating makes the drive lighter and compact and offers energy-saving up to 6%.

Applications:

• Industrial Machinery
• Agricultural Machinery
• Home Appliances
• Engines

Overview:

HEC’s Taper Bush Pulley eliminates re-boring and keyway problems, since each pulley need not be finished according to different bore and keyway requirements. With the help of Taper Bushes, change in the diameter and position of pulleys are easily made.
The Taper Bush Pulleys are therefore ideally suited for wide range of application in the entire field of drive technology.

Details:

All HEC Taper Bush Pulleys are made from superior quality cast Iron in over 400 standard sizes. Also additional sizes against special requirements and special material grade can be provided. HEC’s TBP confirm to IS and ISO groove specifications and standard sizes can transmit up to 330 HP of power at 1440 RPM.

Applications:

• Machinery
• Automotive
• HVAC Systems
• Generators

Overview:

The typical step pulley consists of three to five grooves. This type of step pulley is found on equipment such as drill presses, lathes and milling machines where different operational speeds can be produced simply by changing the belt to a different pulley size The step pulley is always operated in pairs, and when the belt is changed on one pulley, it is also changed on the corresponding pulley on the other side of the belt.

Details:

When it has been determined that the speed should be regulated on a particular step pulley equipped machine, the process of adjusting the speed is usually an easy one. With the motor in the off position, open the belt cover. Take note of where the belt is currently positioned on the pulleys. Remember, a small pulley driving a larger pulley will result in more power but less speed output. Conversely, a large pulley driving a smaller pulley will have more speed output but less power .

Applications:

• Woodworking Tools
• Metalworking Tools
• Textile Machinery

Overview:

A flat pulley is a type of pulley that is used with flat belts to transfer power between rotating shafts. Flat pulleys and belts were historically among the earliest types of belt drives and are still used in certain applications today.

Details:

The construction of flat pulleys is based on standard. The most common designs are flat pulleys with a rounded contact surface. The rounding ensures the centering of the flat belt in operation.

Applications:

• Agricultural equipment
• Industrial machinery
• Specialized industrial machinery

Overview:

All Bushings up to sizes M, and those with a shallow keyseat, are manufactured in DUCTILE iron, a stronger material offering numerous advantages. All sizes have a set screw over the keyway to secure the key which is advantageous in vertical applications.
100% interchangeable with licensed manufacturer’s products.
Available in inches & metric sizes.
Available “Short” for weld-on hubs.
Full, not partial split.

Applications:

• Mixers and Agitators.
• Conveyors.
• Material Handling Equipment.

Overview:

NSP pulleys provide a reliable and efficient solution for power transmission in various industrial applications. Their narrow section design, high torque capability, and compatibility with narrow section V-belts make them suitable for compact and high-performance drive systems. Proper installation, alignment, and maintenance are crucial to maximizing the benefits and longevity of NSP pulleys in any application.

Applications:

• Belt Conveyors
• Textile Industry
• Power Tools

Overview:

A Pin Bush Coupling is a type of mechanical coupling used to connect two shafts and transmit torque while allowing for some degree of misalignment and flexibility. It is commonly used in various industrial applications where reliable power transmission and the ability to accommodate slight misalignments are required.

Applications:

• Industrial Machinery
• Automotive Applications
• Agricultural Equipment

Overview:

BC Couplings offer a robust and versatile solution for connecting shafts and transmitting torque in various industrial and mechanical applications. Their ability to handle misalignments and ease of maintenance make them suitable for many systems where flexibility, reliability, and durability are essential.
Proper installation, alignment, and maintenance are crucial to optimizing the performance and longevity of BC Couplings:

Applications:

• Construction Equipment
• pumps and Fans
• Material Handling Systems

Overview:

HEC Rigid Couplings are robust, Simple and ideal for exactly aligned shaft. That are torsionally stiff rigid permits larger finish bores in path both walves.

Details:

Gear couplings consist of two hubs with internal and external gear teeth that mesh with each other. This gear engagement allows for efficient torque transmission.

Applications:

• Power Generation
• Mining Equipment
• Automotive

Overview:

The flexible capabilities of the Tyreflex Coupling help to accommodate angular, parallel and axial misalignments
Parallel Misalignment upto 6 mm. Angular Misalignment upto 4° End Float upto 8 mm Suitable in ambient temp. upto 70° C.

Applications:

• Pumps and Compressors
• Tractors and Harvesters
• Spinning Machines
• Fans and Blowers

Overview:

A chain coupling is a type of mechanical coupling that uses a chain to connect two shafts and transmit torque. Chain couplings provide a durable and cost-effective solution for connecting shafts and transmitting high torque in various industrial and mechanical applications.

Applications:

• High Torque Transmission
• Tractors and Harvesters
• Mining Equipment

Overview:

Star couplings are mechanical devices that connect two shafts together at their ends to transmit torque
It is named for its star-shaped flexible element that is central to its design
Their ability to handle misalignment and reduce noise makes them suitable for a range of uses. Proper installation, alignment, and maintenance are crucial to ensuring the optimal performance and longevity of star couplings.

Applications:

• Drive Systems
• Textile Industry
• Pumps and Compressors

Overview:

Nylon couplings are a type of flexible coupling commonly used in various mechanical applications to connect two shafts together, allowing for misalignment, vibration damping, and shock absorption.

Applications:

• Pumps
• Conveyors
• Fans
• Machinery

Overview:

This coupling is used for transmitting torque in various mechanical devices. It is hugely treasured all over the world due to its excellent finish, study design and accurate dimensions.
This Brake Drum Geared Coupling is manufactured by making use of high-grade metal alloy and advanced machinery.

Applications:

• Conveyors
• Cranes and Hoists

Overview:

An encoder coupling, also known simply as a shaft coupling for encoders, is a specialized type of coupling used to connect the shaft of an encoder to a driven shaft or motor shaft. Its primary purpose is to ensure accurate and reliable transmission of rotational motion from the encoder to the driven equipment while accommodating misalignments and minimizing vibrations. Here’s an overview of encoder couplings.

Applications:

• Encoders and Resolvers
• Automated Guided Vehicles
• Medical Devices
• Solar Trackers
• Tool Changers

Overview:

R B couplings are designed to provide flexible connection and torque transmission between two shafts while allowing for misalignment and reducing shock loads and vibrations.
Resilient Bushing couplings are a versatile and effective solution for a wide range of industrial applications where vibration damping, misalignment compensation, and shock absorption are important

Applications:

• Pumps
• Fans and Blowers

Gear Coupling

Overview:

Muff Coupling is the simplest type of rigid coupling, consists of a hollow cylinder whose inner diameter is same as shaft.
Muff couplings are a reliable and straightforward solution for connecting shafts in various mechanical systems.

Applications:

• Machinery and Equipment
• Pumps
• Conveyors
• Compressors

Overview:

A sprocket is a wheel with teeth or cogs that mesh with a chain, track, or other perforated or indented material. Single sprockets have one set of teeth and are typically used to drive a single chain in mechanical power transmission systems. They are a critical component in various machinery and equipment, ensuring smooth and efficient movement Sprockets typically do not have a flange. Some sprockets used with timing belts have flanges to keep the timing belt centered. They can be run at high speed and some forms of chain are so constructed as to be noiseless even at high speed.:

Details:

Single sprockets are essential components in many mechanical systems, offering reliable and efficient power transmission. Proper selection, installation, and maintenance of sprockets are crucial to ensure the smooth operation and longevity of the machinery they are a part of.

Applications:

• Industrial/Mechanical Power Transmission And Conveyor
• Motorcycles
• Automotive
• Agricultural Machinery
• Generators

Overview:

Duplex sprockets are sprockets designed to engage with duplex chains, which consist of two parallel rows of links. These sprockets have two sets of teeth, providing a greater surface area for the chain to engage, which can enhance load distribution and reduce wear. Duplex sprockets are often used in applications where higher strength and durability are required compared to simplex (single-strand) sprockets:

Details:

Duplex sprockets are an essential component in many industrial and mechanical systems, providing robust and reliable power transmission for applications that require higher load capacities and enhanced durability. Proper selection, installation, and maintenance of duplex sprockets are crucial to ensure optimal performance and longevity of the machinery they are a part of.

Applications:

• Agricultural Machinery
• Pumps
• Compressors

Overview:

Triple sprockets, also known as triplex sprockets, are designed to work with triple-strand chains, which consist of three parallel rows of links. These sprockets have three sets of teeth, providing a larger surface area for the chain to engage with, which can enhance load distribution and reduce wear. Triple sprockets are often used in applications that require even higher strength and durability compared to simplex and duplex sprockets:

Details:

Triple sprockets are essential components in many industrial and mechanical systems, providing robust and reliable power transmission for applications that require the highest load capacities and enhanced durability. Proper selection, installation, and maintenance of triple sprockets are crucial to ensure optimal performance and longevity of the machinery they are a part of.

Applications:

• Heavy-Duty Conveyor Systems
• Pumps
• Construction Equipment
• Agricultural Machinery
• Generators

Overview:

A chain sprocket is a toothed wheel that engages with a chain to transmit rotary motion between two shafts, typically found in mechanical power transmission systems. Chain sprockets are used in a wide range of applications, from bicycles and motorcycles to industrial machinery and conveyors:

Details:

Chain sprockets are essential components in many mechanical systems, providing reliable and efficient power transmission. Proper selection, installation, and maintenance of chain sprockets are crucial to ensure the smooth operation and longevity of the machinery they are a part of.

Applications:

• Motorcycles
• Industrial machinery
• Agricultural Machinery
• Mining Equipment
• Pumps

Overview:

Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles:

Details:

Understanding these aspects of roller chains can help in selecting the right chain for your application and maintaining it for optimal performance and longevity.

Applications:

• Machinery
• Pumps
• Motorcycles and Bicycles
• Industrial Machinery
• Automotive Engines

Overview:

A roller chain is a type of chain drive commonly used for the transmission of mechanical power in various types of machinery. Here’s a comprehensive look into roller chains:

Details:

roller chains can help you select the right chain for your application and maintain it for optimal performance and longevity. If you have specific questions or need detailed guidance on any particular aspect.

Applications:

• Heavy-Duty Roller Chain
• Standard Roller Chain
• Corrosion-Resistant Chain
• Self-Lubricating Chain
• Generators

Overview:

A half link, also known as an offset link, is a special type of link used in roller chains to adjust the length of the chain by half a pitch. This allows for finer adjustments in chain length, which is particularly useful when the required length of the chain does not match an even number of full links. Here's an in-depth look at half links:

Details:

Half links are valuable components in roller chains, providing flexibility and convenience for length adjustments and repairs. However, they must be used with care, as they can be weaker than full links. Proper installation, regular inspection, and maintenance are crucial to ensure the half link performs effectively without compromising the overall strength and reliability of the chain.

Applications:

• Chain Length Adjustment
• Maintenance and Repair
• Customization

Overview:

A coupling bolt is a specialized fastener used to connect two shafts or other components in mechanical systems. It is typically used in conjunction with other coupling components to ensure a secure and aligned connection. Here’s an in-depth overview of coupling bolts:

Details:

Coupling bolts are essential components in mechanical systems, providing secure and reliable connections between shafts, pipes, and other parts. Proper selection, installation, and maintenance are crucial to ensuring the effectiveness and longevity of coupling bolts in various applications.

Applications:

• Mechanical Joints
• Industrial machinery
• Automotive
• Pipe Couplings
• Pumps

Overview:

A motor nail coupling, often referred to as a pin coupling or a nail coupling, is a type of flexible coupling used to connect two shafts in a manner that accommodates slight misalignment and provides some flexibility.
These couplings are typically used in applications where precise alignment is difficult to achieve or where some shock absorption is desired. Here are the key aspects of motor nail couplings

Applications:

• Industrial Machinery
• Compressors
• Motors and Pumps
• Agricultural Equipment
• Marine Applications

Overview:

HEC India is one of the leading of Pillow Block in India that offering extensive range of Pillow Block.
Pillow Block using finest raw material with the international quality standards. We provide superlative bearings with the heavy blocks

Applications:

• Industrial Machinery
• Mining and Construction Equipment
• Material Handling
• Agricultural Equipment
• Fans and Blowers

Overview:

An Anti-Vibration (AV) mount, also known as a vibration isolator or vibration mount, is designed to reduce the transmission of vibrations and noise from machinery or equipment to surrounding structures.
They are commonly used in various applications to enhance the performance and longevity of both the machinery and the structures they are mounted on.

Applications:

• Noise Reduction
• Safety
• Improved Performance

Overview:

With its unique wrap around Nitrile rubber connecting element, the Snap Wrap coupling eliminates the need for dismantling the connected equipment while inspecting or replacing the element a major benefit when down-time on machinery can run into huge amount
Combined with a range of prebored hubs, a modular hub design and a spacer option, the Snap Wrap coupling is unsurpassed for quality, flexibility, speed for installation and maintenance.

Applications:

• Industrial Machinery
• Automotive
• Robotics
• Packaging Machinery

Overview:

V Belt Pulley is also known as V Groove Pulley.
India is one of the leading of V Belt Pulleys in India that offering extensive range of Pulley, from 2″ To 36″ Inches. V Belt Pulley using finest raw material with the international quality standards.
V Belt Pulley with strong market position in India.

Applications:

• Industrial Machinery
• Automotive
• HVAC Systems
• Agricultural Equipment
• Marine Applications